Glossary
Key terms in asset management, calibration, auditing and regulation.
Asset management
Asset disposal
Asset disposal is an asset’s permanent removal from the inventory through failure, sale, transfer or loss. It is recorded with its reason, date and approver.
Asset inventory
An asset inventory is the up-to-date list of an organisation’s equipment and property, with each item’s identification, location and responsible person.
Asset lifecycle
An asset’s lifecycle covers everything that happens to it from purchase to disposal: registration, commissioning, use, inspections, moves and retirement.
Asset loan
An asset loan is the temporary handover of an asset to another person, department or site, with a planned departure date and a planned return date.
Asset management (ISO 55000)
Asset management is the coordinated activity through which an organisation realises value from its assets. Its international reference is the ISO 55000 family.
Asset tagging
Asset tagging physically identifies each asset with a label, usually a QR code or barcode, that leads to its record and history.
Asset traceability
Asset traceability makes it possible to rebuild, from dated records, where each asset has been, who has had it and what has been done to it over its life.
Capital asset
A capital asset is a durable item, such as equipment or a facility, recorded in the inventory, which under a grant must be used for the grant’s purpose.
Chain of custody
The chain of custody is the continuous record of who has held an asset or a sample and for what period, with no gaps.
Inventory reconciliation
Inventory reconciliation compares what the official inventory lists with what actually exists, and records each difference so it can be resolved.
Management by exception
Management by exception focuses attention only on what departs from the plan, such as an expiry, a delay or a discrepancy, instead of reviewing everything.
Quality and audits
Accreditation (ENAC)
Accreditation recognises the technical competence of a laboratory or a body. In Spain it is granted by ENAC, the sole national accreditation body.
Audit
An audit is a systematic, independent review that checks, against evidence, whether an organisation meets a standard or its own procedures.
Audit trail
An audit trail is the automatic record of every change to a piece of data: what changed, the previous value, who made the change, when and often why.
Control body (OCA)
A control body (OCA) is an accredited organisation that checks that industrial installations and products comply with safety regulations in Spain.
Corrective action
A corrective action removes the cause of a nonconformity so that it does not happen again. It is documented and its effectiveness is checked later.
Critical asset
A critical asset is an asset whose failure, loss or missing records can lead to a nonconformity, a lost accreditation or having to repay a grant.
Data integrity (ALCOA+)
Data integrity ensures that a record is complete, consistent and accurate throughout its life. In the pharmaceutical sector it is summed up as ALCOA+.
Evidence
Evidence is a document or record that shows something specific to an auditor, such as a certificate, an invoice, a photograph or an instrument reading.
Nonconformity
A nonconformity is a failure to meet a requirement, found in an audit or an inspection. Its cause must be analysed and the problem corrected.
Metrology and calibration
Calibration
Calibration compares what a measuring instrument indicates with a reference standard and records the result, with its uncertainty, in a certificate.
Calibration plan
A calibration plan sets which instruments are calibrated, how often, against which acceptance criteria and by whom. Auditors usually ask for it.
Equipment qualification
Equipment qualification is documented evidence that pharmaceutical equipment is properly installed and performs as intended (DQ, IQ, OQ and PQ).
External calibration
External calibration is calibration carried out by a laboratory outside the organisation, usually accredited, which returns the asset with its certificate.
Legal metrology
Legal metrology is the state’s control over measuring instruments that affect third parties, such as retail scales or fuel dispensers.
Measurement uncertainty
Measurement uncertainty is the margin of doubt in a result. It is stated on the calibration certificate and helps decide if an instrument is fit for use.
Metrological traceability
Metrological traceability links a measurement to a recognised standard through an unbroken, documented chain of calibrations.
Temperature mapping
Temperature mapping measures temperature at many points in a cold room, warehouse or vehicle to check that it stays within the required range.
Verification
Verification checks that a measuring instrument stays within a set tolerance, usually based on the results of its calibration.
Standards and obligations
Earmarking period
The earmarking period is the time a grant-funded item must remain in use for the grant’s purpose. Spanish law sets a minimum of five or two years.
Good Distribution Practice (GDP)
Good Distribution Practice sets how medicines are stored and transported so that they keep their quality, including temperature control.
Good Manufacturing Practice (GMP)
Good Manufacturing Practice (GMP) is the set of rules that ensures medicines are manufactured and controlled to a consistent quality.
Grant justification
Grant justification is the documentary proof that a grant was used for its purpose. If it falls short, the money may have to be repaid.
HACCP
HACCP (Hazard Analysis and Critical Control Points) is the mandatory system a food business uses to identify and control its food safety hazards.
IFS Food
IFS Food is a food safety and quality standard used to audit food manufacturers, including how they control their measuring equipment.
ISO/IEC 17020
ISO/IEC 17020 sets the requirements for bodies that carry out inspections, and is the standard against which ENAC accredits them in Spain.
ISO/IEC 17025
ISO/IEC 17025 sets the competence requirements for testing and calibration laboratories, and is the basis for their accreditation by ENAC in Spain.
Medical electrical equipment
Medical electrical equipment is electrical equipment applied to a patient to diagnose, treat or monitor them. Its safety tests follow IEC 62353.
Monitoring and measuring resources (ISO 9001)
Monitoring and measuring resources are the instruments a company uses to check what it produces. ISO 9001 requires them to be suitable and reliable.
Work equipment (RD 1215/1997)
Work equipment is any machine, apparatus or installation used at work. Spain’s RD 1215/1997 requires its inspection results to be documented and kept.
SEMBLA concepts
Asset intelligence
Asset intelligence is knowing which assets an organisation has, what has happened to each one and what it can prove about them, and using that to decide.
Asset record
The asset record brings together everything about an asset: its code, status, responsible person, history, documents and upcoming inspections.
Last dated signal
The last dated signal states when, where and how the location of an asset was last confirmed, so that an auditor can check it.
Permanent identifier (AID)
The permanent identifier (AID) is the unique code SEMBLA gives each asset. It stays the same when its label or inventory number changes.
Together, we will go through what SEMBLA would look like with your assets.