Skip to content

Evidence capture

Capture the activity of your assets and turn it into evidence. SEMBLA combines scans, automatic detections and recorded actions to build the history of each asset. See what was observed, when and from which source, and use that information to understand changes and act.

The result

A balance is listed in Room 2.05. An observation is recorded in Room 2.07 and a difference appears that is worth reviewing. The value is not just showing a room: it is keeping the record, its date and the context of the discrepancy.

The asset’s QR label

How it works

  1. 01

    Identify the asset

    By its code, its QR label or its RFID or BLE identifier.

  2. 02

    Record the observation and what backs it

    What was observed, when, where and from which source.

  3. 03

    Add it to the history

    It joins the history of the asset and nothing earlier is deleted.

  4. 04

    Review differences

    Whatever does not match the inventory is flagged.

  5. 05

    Decide what to do

    A person decides, with the context in front of them.

Ways of capturing

SEMBLA combines QR, RFID and BLE to record the activity of your assets, either with a person involved or through automatic capture. In the zones and checkpoints you configure, detections are added to the history with their date and origin. We adapt the capture to your assets and your operation.

  • Manual

    QR

    It is scanned

    How it is read
    With the camera of the phone or tablet of whoever acts.
    What is installed
    Only the label on the asset.
    Approximate range
    In sight, a few centimetres away.
    When it fits
    Calibrations, inspections, loans and stocktakes.
    What is recorded
    The date, the place and the action, with its documents.
  • Automatic

    UHF RFID

    It passes a checkpoint

    How it is read
    When it goes through a gate or an antenna, without being seen or stopping. Reads several assets at once.
    What is installed
    Gates or antennas at doors, docks and entrances, or handheld readers.
    Approximate range
    A few metres around the reader.
    When it fits
    Entries and exits of controlled areas and room stocktakes.
    What is recorded
    Every pass through a checkpoint, with its date and its reader.
  • Automatic

    BLE

    It is in the zone

    How it is read
    A beacon on the asset transmits and the gateways in each zone pick it up.
    What is installed
    Beacons on the chosen assets and gateways per room or floor.
    Approximate range
    Tens of metres indoors.
    When it fits
    Assets that often change rooms.
    What is recorded
    The presence of the asset in each zone, with its date.
  • Automatic

    Computers

    It reports when it connects

    How it is read
    A small program sends the model and the serial number.
    What is installed
    The program, on the computers you choose.
    Approximate range
    Every computer with the program installed.
    When it fits
    Laptops and desktop computers.
    What is recorded
    Its last connection, with no location or personal data.

You start with QR and the program for computers. RFID and BLE are added where they bring value, depending on your assets and your operation.

Whether it comes from a QR scan, an RFID reader, a BLE gateway or a computer, every detection is added to the history of the asset with its date, its origin, what backs it and its fingerprint.

An example

An inspection job, step by step. Every detection and every action is added to the history of the instrument with its time, its origin and its fingerprint.

Illustrative exampleEarth tester · TL-0826 Oct 2026

  1. 07:52

    Headquarters · leaves the store

    • UHF RFID · gate S-01
  2. 09:05

    Branch · arrival

    • UHF RFID · gate D-02
  3. 09:11

    Branch · equipment room

    • BLE · room gateway
  4. 11:20

    Customer site · measurement

    • QR · scan
    • PDF attached
The history it leavesEarth tester · TL-0826 Oct 2026
  1. 0107:52Leaves assigned to work order OT-3381, with its calibration in date.4c1e…a07f
  2. 0209:05Arrives at the branch that will carry out the job.9b30…12dd
  3. 0309:11The room gateway detects its beacon.e27a…5c90
  4. 0411:20Earth resistance: 4.2 Ω. Report and calibration certificate attached.71fd…b3e4

FAQ

All questions

Do I need to install readers to get started?

No. You start with QR labels and the program for computers. RFID and BLE are added where they bring value.

What is the difference between manual and automatic capture?

In manual capture, a person scans the label when acting. In automatic capture, readers or gateways record the passage or presence of the asset without anyone stepping in.

Does SEMBLA follow the people who carry the assets?

No. It records where each asset was seen, never where the person carrying it is.

What happens if an asset stops being detected?

A review is opened so that a person can check it. It is never marked as lost automatically.

How do I know a record has not been changed?

Every record carries its fingerprint, calculated when it is saved. If there is a mistake, it is corrected with a new record and the history stays complete.

Together we look at which way of capturing fits your assets and your operation.